Skip to the page

Plumbing inspection cost in Stockton

Three different jobs share the name plumbing inspection: a general check, a sewer camera inspection and a yearly backflow test. Each has its own price range, and this page lays them side by side.

Last changed

Get my quote

Bar chart of plumbing inspection price ranges

A general plumbing inspection usually costs about $138 to $417 in published national guides, with an average near $281. A sewer line inspection runs $183 to $502, and a yearly backflow device test is often $75 to $150 per device, based on a Los Angeles County water district's figure. Your Stockton quote will differ, and the plumbing business that visits sets the real price.

If you need a backflow test, start with backflow and permits, which explains what the test is for. This page is the price side.

How much does a plumbing inspection cost?

A general plumbing inspection usually costs $138 to $417, with an average near $281, according to Homeyou. We found no sourced price for a gas line inspection or pressure test, so we give none. These are quick checks of visible pipes, fixtures, shutoffs and leaks.

A plumber usually bills an inspection as a flat fee or as a call out fee plus an hour. If you are buying a home, a general home inspection may include a limited look at plumbing, but a plumbing-specific inspection looks closer at supply lines, drains, water pressure and the water heater.

Inspection typeTypical rangeWhat it covers
General plumbing inspection$138 to $417Visible pipes, fixtures, shutoffs, leaks
Sewer line camera inspection$183 to $502Video of the sewer line
Backflow device test$75 to $150 per deviceAnnual test by a tester who holds the required certification

What does a camera plumbing inspection cost?

A sewer line camera inspection typically costs $183 to $502, and Homeyou lists a camera pipe inspection at $169 to $443. A plumber feeds a camera into the line to look for blockages, cracks and collapsed sections, and the video shows what repair is needed. Longer runs, difficult access and added reporting push the price up.

One drain-service business publishes a breakdown: a base fee, a fee for difficult access, a per-foot charge beyond 100 feet, a charge for each branch line and a charge for a video report. Those add-ons are typical of how plumbers build the price, though figures differ by business. A line with no outside cleanout can cost more, since the plumber may need to pull a toilet to reach it.

How much does backflow testing cost?

A backflow test commonly costs $75 to $150 per device, according to Los Angeles County Public Works, which notes the price varies by tester and location. Stockton is different from Los Angeles County, so treat that as a guide, not a quote. A test is required once a year where a device is installed.

Cal Water says backflow prevention assemblies must be inspected and tested annually by backflow assembly testers who hold the required certification, and that property owners are responsible for making sure protection is in place and maintained. It adds that failure to comply could result in discontinuation of water service. If Cal Water supplies your address, ask its Stockton office what applies to your property. Testing is done by a tester who holds the required certification, so ask for that credential before you book.

A failed test adds repair or parts cost on top of the test fee. Ask the tester what a repair would cost before the test, so a fail does not surprise you.

What pushes the price up or down?

Price depends on the type of inspection, access, the number of devices or fixtures, and timing. A single backflow device is cheaper than a commercial property with several, and a sewer line with a cleanout is cheaper to scope than one without.

  • Number of devices. Backflow testing is priced per device, so multiple devices cost more.
  • Access. A buried or hard-to-reach device or sewer line adds time.
  • Report or paperwork. Video reports and filing the test result with the water supplier may be separate fees.
  • Timing. Weekend, evening and holiday visits cost more.
  • Property type. Business properties often have bigger or more devices than a house, so pricing can differ. See commercial plumber hourly cost for how commercial work is billed.

Who is allowed to do the work?

Backflow preventers fall under the plumbing contractor classification in California, C-36, which the Contractors State License Board describes as covering water and gas lines from the meter to the building, along with maintenance and replacement of safety devices such as backflow preventers. Testing itself is done by a tester who holds the required certification.

A business answering your quote request carries its own license, and cslb.ca.gov lets you look it up. Beyond testing, a camera inspection often leads into a repair, and the sewer line repair page covers what comes next, while the plumber cost page covers general rates.

How to compare inspection quotes

Compare what each quote covers. A general inspection quote should say what is checked and whether you get a written report. A camera quote should say how much line it covers and whether you get the video. A backflow quote should say whether the filing fee is included.

Ask whether the inspection fee is credited if you hire the plumber for repairs, since some businesses apply it to the job. The hourly rate guide explains how call out fees work.

Questions people ask

Do I need a plumbing inspection when buying a house?

It is not required in most cases, but it can be worth the $138 to $417 a general inspection costs. A sewer line camera inspection of $183 to $502 is the check that most often finds expensive hidden problems, especially in older homes with older sewer lines.

How often does a backflow device need testing?

Once a year. Cal Water states that assemblies must be tested annually by backflow assembly testers who hold the required certification, and LA County Public Works says the same for its customers. Ask your water supplier whether a test is also due after a repair or a new installation.

Who pays for backflow testing?

The property owner. Cal Water says owners are responsible for the assemblies on their side of the meter, and Los Angeles County says the customer arranges and pays for a tester who holds the required certification. A landlord or a business owner may pass the cost to a tenant, depending on the lease.

Does a camera inspection damage my pipes?

Not normally. The camera is fed through an existing opening such as a cleanout and does not involve digging. It shows blockages, cracks and collapsed sections, and it can prevent unnecessary digging by showing exactly where the problem is.

Can a plumber do the inspection and the repair in one visit?

Often, yes, if the problem is minor and the parts are on the truck. Bigger repairs, such as a collapsed line, need a separate visit and a new quote. Ask whether the inspection fee is credited toward the repair.

Sources

Last changed